There are many choices to let you know about on this week’s roundup, together with a webinar by Raise3D, the Area & Missile Protection Symposium, and extra superior coaching courses from Stratasys. Plus, MMX 2024 by America Makes will happen this week, and 3DPrint.com can be there on the occasion. Learn on for all the main points!
3D Printing Information Unpeeled
Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), presents a information livestream one to 2 occasions per week known as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Dwell and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing trade that week, and why they’re necessary. Among the tales in his roundup are ones we’ve lined at 3DPrint.com, and a few should not, however they’re all equally attention-grabbing and impactful!
August 5 – 7: Stratasys Continues Superior Coaching
This week, Stratasys continues its superior coaching programs at its North American subsidiary headquarters in Minnesota. First up, from August 5-7, “FDM Superior Perception and File Preparation” will equip clients of FDM Excessive-Finish 3D printing methods with the information to maximise the worth of their printers. Then, “SAF Superior Operations” can be supplied from August 6-7 for Stratasys H350 printer clients.
“You might be in the appropriate place if you wish to begin or deepen your studying about additive applied sciences and your Stratasys printer.”
For extra particulars and registration, electronic mail coaching.us@stratasys.com.
August 5, 7, & 9: Expertise Stratasys Tour Continues
The Expertise Stratasys Tour continues this week, providing customers a handy approach to see the corporate’s know-how for your self, as every cease is hosted by an area 3D printing group that may reply your questions and stroll you thru the varied printers and purposes. First, the truck will cease on the TechWorks Campus in Waterloo, Iowa on Monday, August fifth, after which heads to the Trade Brewing Co. in Peoria, Illinois on Wednesday, August seventh. Lastly, on Friday, August ninth, the tour heads to Wichita State College in Kansas.
“Be part of us at one in all our tour stops throughout america to see the newest in Stratasys 3D printers, supplies, software program and additive options, together with Stratasys printers – the H350™, F370CR, J55™, Origin® One, Neo®800 and the brand new F3300™.”
Keep watch over the Expertise Stratasys tour calendar right here to see if the truck is coming to you!
August 6 -7: MMX 2024 by America Makes
The annual Members Assembly and Alternate (MMX) by America Makes is that this coming week, August 6-7, in Youngstown, Ohio. This member-centric occasion presents strategic and thought-provoking discussions and content material from specialists all through the trade, authorities, navy, and academia, and in addition shares the general accomplishments of this Manufacturing USA Institute. The aim is to unite the group, encourage collaboration, and work in direction of constructing a aggressive American additive manufacturing industrial base.
“The conversations and shows permit for info sharing and gathering of the developments of AM to extend the adoption of additive manufacturing within the U.S. industrial base.”
You’ll be able to register for MMX 2024 right here. 3DPrint.com is a proud Media companion of each America Makes and MMX 2024. Plus, I can be attending the occasion, so please discover me and say hi there!
August 6 – 7: Disruptive Expertise for Protection Transformation
For the second yr, specialists from the protection and trade communities will come collectively on the Institute for Protection and Authorities Development (IDGA) Disruptive Expertise for Protection Transformation (DTDT) Summit to discover and talk about the cutting-edge applied sciences shaping trendy warfare and addressing gaps in U.S. vital know-how areas. From August 6-7 in Austin, Texas, attendees may have the prospect to realize insights from CTOs in a number of branches of the navy about necessities, coverage, technique, and priorities for leveraging machine studying and synthetic intelligence to reinforce protection capabilities, with a highlight on drones and unmanned aerial autos (UAVs). Additive manufacturing is just not listed as a dialogue subject within the agenda, however the know-how usually goes hand in hand with a few of the subjects which might be up for dialogue, and we all know that navy and protection purposes are important within the AM trade.
“The occasion is ready to cowl a wide selection of essential subjects, from AI/ML and Cyberwarfare to Information & Cloud, Autonomy, Sensors, Satellites, and past. That is your likelihood to realize unique insights, align your methods with functionality necessities, and forge strategic partnerships with the US and NATO militaries.”
You’ll be able to register for the DTDT Summit right here.
August 6 – 8: Area & Missile Protection Symposium
There are a number of occasions this week centered on AM in navy and protection purposes, together with the Area & Missile Protection (SMD) Symposium in Huntsville, Alabama from August 6-8. Attendees will hear immediately from senior leaders with main authorities and trade organizations, and there can be an exhibit corridor with product and know-how demonstrations, know-how tracks, panels on acquisitions and the warfighter, a small enterprise showcase, particular dinners and networking occasions, and extra. You’ll acknowledge a few of the exhibitors, together with Northrop Grumman, ADDMAN, Boeing, GoEngineer, NASA’s Marshall Area Flight Middle, L3Harris, Lockheed Martin, and extra.
“The SMD Symposium is the main academic, skilled improvement and networking occasion within the area and missile protection group. The symposium is broadly attended by leaders and professionals from america and our allies all over the world.”
You’ll be able to register for the symposium right here.
August 7 – 8: Superior Manufacturing Expo (AME)
From August 7-8, the Superior Manufacturing Expo (AME) will happen in Grand Rapids, Michigan. This occasion is free to the general public and has 4 manufacturing halls: Automation, Metalworking, MRO/Security, and Trade 4.0 Expertise. Over 250 exhibitors can be on the expo, with 3D printing exhibitors present in each the Metalworking and Trade 4.0 halls. There can be some actually attention-grabbing shows within the breakout rooms, together with “Mission DIAMOnD: Creating the Nation’s Largest 3D Printing Community,” in addition to an Trade 4.0 Accelerator – Startup Pitch Occasion and a networking occasion.
“The present is designed to be the best, most reasonably priced, and most precious occasion for attracting prime manufacturing suppliers from all over the world,” Mark Ermatinger, the Founding father of Superior Manufacturing Expo, wrote for this system.
You’ll be able to register for the expo right here.
August 8 – 9: LPBF Basis Course with DRIVE AM Youngstown
In the event you’re trying to deepen your understanding of laser powder mattress fusion (LPBF), together with its challenges, benefits, and issues for adoption, then the “Laser Powder Mattress Fusion Basis Course” August 8-9 by DRIVE AM Youngstown is for you. The in-person course, offered freed from cost by DRIVE AM funding, is a collaborative effort between America Makes, Tailor-made Alloys, W.M. Keck Middle, and the the Youngstown Enterprise Incubator. Contributors will develop foundational information of LPBF course of management, and put together their very own construct, together with half orientation, assist creation, scan technique adjustment, and construct simulation; plus, you get to take residence your steel 3D printed half residence!
“Coaching subjects embrace six subsystems, 5 main components of construct success, and pre-build quality control.”
E mail htaylor@tailoredalloys.com to register.
August 8: Get Technical with the Raise3D Pro3 HS Collection
On Thursday, August eighth, at 12 pm EST, Raise3D will maintain a webinar on “Past Pace: Speed up Custom-made Carbon Fiber Manufacturing with the Raise3D Pro3 HS Printer.” Particular visitor Max Droog, the proprietor of Droog Moto, will joint a panel of trade specialists to debate how the Pro3 Plus HS, with its high-speed composite 3D printing, helped make his bespoke motorbike design imaginative and prescient come to life. Attendees will hear about how hyper pace printing can decrease an organization’s manufacturing prices, how improved precision fuels dependable batch manufacturing, the printer’s Hyper Core filaments and new automated processes, and extra. There can even be a Q&A session on the finish.
“This webinar will give attention to precisely how the Pro3 HS can be utilized to optimize manufacturing pace, efficiency, and effectivity.”
You’ll be able to register for the webinar right here.
August 9 – 10: AM Convention & Exhibition Dubai
The International Additive Manufacturing Convention and Expo Dubai is the one occasion within the UAE area that’s devoted to AM, and it’s happening from August 9-10 at Atlantis, The Palm, in Dubai. Organized by Falcon Enterprise Analysis, the occasion is an immersive expertise designed to teach, encourage, and empower trade professionals, displaying attendees how AM is revolutionizing creativity within the realms of style, artwork, structure, and extra. Key trade gamers, researchers, and innovators from all over the world will share in regards to the newest advances in AM know-how, and discover the supplies, processes and purposes throughout a number of industries.
“The International Additive Manufacturing Convention and Expo serves as a nexus the place the brightest minds converge to discover the infinite prospects and potential of this transformative know-how. Furthermore, the International Additive Manufacturing Expo will showcase a various array of exhibitors, starting from main multinational firms to rising startups, unveiling their groundbreaking merchandise, companies, and options.”
You’ll be able to register for the convention and expo right here.
August 15: 3D Printing/AM Market Traits & Alternatives
This final webinar remains to be week away, however we needed to ensure you had loads of time to place it in your calendar! On Thursday, August fifteenth, at 12 pm EST, additive manufacturing market analysis and trade evaluation supplier AM Analysis, which has tracked and forecasted the 3DP/AM trade markets for greater than a decade, will maintain a free, data-based webinar about “3DP/AM Market Traits & Alternatives.” 2023 was usually a yr of slower development for the 3D printing/AM markets, however midway by 2024, is that this yr monitoring equally? Be part of the dialogue with Scott Dunham, EVP of AM Analysis, to search out out!
“From metals to polymers, PBF to DED to ME (and extra), which space is rising quickest? And which purposes and industries? Lastly, simply how does AM Analysis measure the market? What facets of 3DP/AM are included or excluded?”
You’ll be able to register for the webinar right here.
Do you might have information to share about any future webinars or digital and stay occasions? Please tell us!
Subscribe to Our E mail E-newsletter
Keep up-to-date on all the newest information from the 3D printing trade and obtain info and presents from third social gathering distributors.
