Be a part of the Professional Committee for the 2024 3D Printing Trade Awards to assist choose the winners!
Quick meals big McDonald’s has partnered with Philips MyCreation, a division of Philips, to implement a novel lighting design idea utilizing 3D printing.
The plan is to put in customized 3D printed lighting fixtures in all 38,000 McDonald’s places, that includes distinctive embossed round pendants. By producing these lampshades with recyclable supplies at close by amenities, McDonald’s goals to cut back transport air pollution, minimize utility prices, and reduce waste in comparison with conventional strategies.
Progressive pendant lighting design with eco-friendly options
In response to Marc Pochert, Senior Director of International Design Integration at McDonald’s, he initially doubted the feasibility of their lighting idea, which required a singular design not out there off-the-shelf. The design included pendant lights with a translucent, hemispherical construction, an embossed floor sample, and a special sample on the highest.
The complexity of manufacturing the required mildew posed important challenges for McDonald’s. Nonetheless, after discovering Philips MyCreation’s capabilities on social media, the group determined to achieve out. Following two rounds of 3D printed samples, McDonald’s turned assured in Philips MyCreation’s means to fulfill their necessities.
In simply three months, the 3D printed pendant gentle fixture design acquired approval and validation. This answer not solely met McDonald’s design expectations but in addition aligned with its sustainability objectives, which embrace a 60% discount in carbon footprint by 2030. By utilizing not less than 55% recycled or bio-circular plastics and producing lamp shades regionally, transport emissions have been decreased and supply occasions shortened. Moreover, on-demand manufacturing eradicated the necessity for giant inventories.
In response to the fast-food big, the partnership can be scaled up worldwide, with McDonald’s aspiring to introduce the Philips MyCreation lighting answer in eating places throughout over 100 nations by 2023. This rollout will cowl areas from Argentina to Japan, and from Alaska to Australia.
Elsewhere, Philips MyCreation has created lighting options for numerous shoppers, akin to a pendant gentle for Signify at Milan Design Week 2024. It additionally developed tilted fixtures for SeaWorld Yas Island in Abu Dhabi and offered lighting options for the Dutch grocery store chain PLUS.
3D printing lighting methods
3D printing helps create customized and complex lighting with higher design flexibility in comparison with conventional strategies. It makes use of numerous supplies like plastics and metals, permitting for distinctive, customized options whereas lowering waste and enabling environment friendly, localized manufacturing.
One notable instance contains inventive design studio City Scale Interventions (USI) unveiling an immersive lighting and sound set up in Belfast’s historic ‘Entries’ space. That includes 43 suspended ‘ocean orbs’ made with Ultimaker S5 3D printers and recycled PETG filament from Filamentive, the set up was designed to reinforce security and replicate the positioning’s historical past. Initiated by Belfast Metropolis Council’s placemaking technique, the challenge aimed to create a welcoming house for guests and have become a well-liked attraction outdoors Whites Tavern.
On one other observe, the Lighting Analysis Middle (LRC) and Eaton Company partnered to develop a totally 3D printed LED-integrated luminaire. Funded by the U.S. Division of Vitality (DoE), the challenge aimed to advance the adoption of AM in solid-state lighting (SSL) by exploring cost-effective, 3D printed methods. This analysis targeted on materials science, electronics, optics, and superior manufacturing, to realize sustainable manufacturing and scale back waste.
Again in 2015, OceanLED collaborated with Protolabs to develop a low-energy LED lighting system for yachts, creating a singular “aquarium impact” underwater. Initially targeted on high-end yachts, OceanLED transitioned to utilizing polymer-based prototypes to optimize prices for smaller boats. Its Protomold division developed the Amphibian line, the primary lighting assortment for each underwater and above-water use, by means of iterative 3D printing and injection molding.
What 3D printing tendencies do the trade leaders anticipate this yr?
What does the Way forward for 3D printing maintain for the following 10 years?
To remain updated with the newest 3D printing information, don’t neglect to subscribe to the 3D Printing Trade publication or observe us on Twitter, or like our web page on Fb.
Whilst you’re right here, why not subscribe to our Youtube channel? That includes dialogue, debriefs, video shorts, and webinar replays.
Featured picture exhibits McDonald’s companions with Philips MyCreation for revolutionary lighting. Picture by way of Philips MyCreations.
