We’ve received a busy week forward, stuffed with 3D printing webinars and occasions, each digital and in-person. The Expertise Stratasys tour continues, HP gives the following in its Past the Forge webinar sequence, EOS is holding an open home in Michigan, the 3D Speak Present will talk about the impression of AM on getting older vitality belongings, and extra. Learn on for all the small print!
3D Printing Information Unpeeled
Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), gives a information livestream one to 2 instances per week referred to as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Dwell and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing business that week, and why they’re necessary. A number of the tales in his roundup are ones we’ve coated at 3DPrint.com, and a few will not be, however they’re all equally fascinating and impactful!
July 29 & 31, August 1: Expertise Stratasys Tour Continues
The Expertise Stratasys Tour continues this week, providing customers a handy technique to see the corporate’s expertise for your self, as every cease is hosted by an area 3D printing workforce that may reply your questions and stroll you thru the assorted printers and functions. The truck stays in Wisconsin this week, heading first to Northcentral Technical Faculty in Wausau on Monday, July twenty ninth, after which stopping on the Milwaukee Faculty of Engineering (MSOE) on Wednesday the thirty first. The tour will really be in Milwaukee for 2 days, as it is going to go to the Harley-Davidson Museum on Thursday, August 1st.
“Be a part of us at one among our tour stops throughout the US to see the most recent in Stratasys 3D printers, supplies, software program and additive options, together with Stratasys printers – the H350™, F370CR, J55™, Origin® One, Neo®800 and the brand new F3300™.”
Regulate the Expertise Stratasys tour calendar right here to see if the truck is coming to you!
July 30 – 31:
The annual NNCI Nano+Additive Manufacturing Summit can be held in Louisville, Kentucky from July 30-31, welcoming superior manufacturing customers and researchers within the fields of additive manufacturing, microtechnology, and nanotechnology. The symposium welcomes attendees to share their findings and outcomes, showcase their capabilities, generate new concepts for the long run, and community with others. Two of the keynote shows will give attention to additive manufacturing, and there may even be shows about MEMS, sensors, and microfluidics; wants for the nano/AM workforce of tomorrow; 2D supplies and gadgets; and extra.
“The purpose of the symposium is to strengthen the collaboration between business and academia within the above focused areas. Contributors will hear thrilling shows in regards to the newest nano/AM applied sciences, find out about present state-of-the-art core services accessible to the general public, and talk about ways in which business can entry all kinds of educational assets, together with their most useful useful resource – inventive, hard-working college students.”
Be taught extra in regards to the summit right here.
July 30 – August 1: NCMS Know-how Showcase
The Nationwide Heart for Manufacturing Sciences (NCMS), in partnership with Puget Sound Naval Shipyard & Intermediate Upkeep Facility (PSNS & IMF), is internet hosting a Know-how Showcase in Bremerton, Washington from July 30-August 1. Exhibitors will obtain excessive visibility for his or her companies and merchandise, and all attendees will find out about alternatives for collaboration with the highest expertise consultants and decision-makers within the US Navy’s upkeep neighborhood.
“Don’t miss this distinctive alternative to shine a highlight in your newest improvements—and to doubtlessly work with the PSNS & IMF Know-how Insertion Group, which is dedicated to transitioning wanted applied sciences into the shipyard.”
You’ll be able to register for the showcase right here.
July 30: Past the Forge with HP
At 8 am PST (11 am EST) on Tuesday, July thirtieth, HP will maintain the fourth session in its “Past the Forge: A Metals 3D Printing Sequence.” The primary one was about Steel Jet expertise, the second targeted on the advantages of 3D printing vs. conventional manufacturing strategies, and the third was about “Design and Selecting Elements to Print.” This session can be all about “Sintering with Additive Manufacturing.”
“On this subsequent session, be taught what the sintering course of is and the way it impacts your remaining half with the HP Steel Jet Resolution.
You’ll be able to register for the webinar right here.
July 31: The Affect of AM on Ageing Vitality Belongings
The twenty fifth episode of the 3D Speak Present, offered by 3YOURMIND, will happen this Wednesday, July thirty first, at 11 am EST. “Additive Manufacturing’s Affect on Ageing Vitality Belongings” will talk about using AM in getting older vitality belongings and its challenges, like half qualification, and the panelists—from 3YOURMIND, RusselSmith, and Exergy—may even share some oil & fuel functions and case research that use half identification software program on this sector. Michael Petch, Editor-in-chief at 3D Printing Trade (3DPI), will reasonable the dialogue.
“Our upcoming episode focuses on the roles of additive manufacturing (AM) in getting older vitality belongings, highlighting key challenges, functions, methods for sustaining a digital stock, and the way to make sure on-demand readiness within the oil and fuel (O&G) business.”
You’ll be able to register for the webinar right here.
July 31: 3D Printing & Coating of SWaP Optimized mm-Wave Parts
Additionally on the thirty first at 11 am EST (5 pm CEST), micro AM and AM coating specialist Horizon Microtechnologies will maintain a webinar in regards to the J.A.M.E.S platform, about how next-gen waveguide-based radio frequency (RF) elements could be created with micro 3D printing and its personal proprietary copper coating, HMT-Steel. These RF elements, that are principally hole tubes with conductive inside surfaces, information electromagnetic waves from one level to a different with minimal lack of vitality and sign degradation. Utilizing conventional manufacturing to manufacture them is difficult for quite a lot of causes, together with machining advanced inside options into strong steel tubes and the necessity for very tight tolerances. Throughout the webinar, “Manufacturing of SWaP Optimized mm-Wave Parts by AM and Superior Metallization Methods,” attendees will be taught some great benefits of utilizing micro 3D printed plastic elements, coated with Horizon’s copper HMT, in waveguide-based RF elements.
“We are going to describe numerous case research which present the profitable use of coated micro-AM elements in mm-wave functions,” defined Horizon Microtechnologies CEO Andreas Frölich in a press launch. “For instance, we undertook rigorous useful testing to show the effectiveness of our HMT-Steel coating course of for making excessive frequency D-Band horn antenna through 3D printing and waveguide transitions. Horizon’s gadgets carried out in addition to conventionally constructed ones, eradicating lots of the reservations that 3D printed gadgets are sometimes confronted with. This proves that some very fascinating alternatives exist as corporations requiring mm-wave elements can now exploit the method benefits of micro-AM by partnering with Horizon as their growth and manufacturing accomplice. For instance, the antenna weighed solely a sixth of its standard counterpart and took up 15% much less house.”
You’ll be able to register for the webinar right here.
August 1 – 2: 3D Printing in Hospitals Discussion board
Materialise is holding a “3D Printing in Hospitals Discussion board” on the Queensland College of Know-how (QUT) in Brisbane Metropolis, Australia from August 1-2. Attendees can take part in periods on matters like implement 3D printing throughout completely different specialties and departments, managing regulatory compliance from completely different views, main obstacles for 3D printing in hospitals and overcome them, and extra. This occasion goals to make significant progress towards the way forward for healthcare by advancing 3D printing adoption on the level of care.
“We’re gathering essentially the most inspirational minds working with 3D printing in hospitals for this particular occasion. Healthcare professionals and leaders in medical 3D printing applied sciences will talk about shared challenges, options, and alternatives.”
You’ll be able to register for the discussion board right here.
August 1: Additive Minds Academy Heart Open Home
The Additive Minds Academy is the coaching arm of EOS’ Additive Minds utilized engineering workforce, and was designed for coaching and upskilling industrial 3D printing engineers and operators via each in-person and on-line programs. In Might, EOS launched its 14,600 square-foot Additive Minds Academy Heart, an in-person coaching facility in Michigan targeted on industrial 3D printing enablement, buyer success, and technical coaching. Now, the corporate needs you to see the middle for your self! It’s internet hosting an Additive Minds Academy Heart Open Home this Thursday, August 1st, from 11 am till 4 pm EST. There can be excursions of the middle’s coaching and collaboration areas, and the steel and polymer machine labs; plus, meals and drinks can be served all through the day.
“We’re more than happy to open our doorways and offer you a first-hand take a look at our new Additive Minds Academy Heart, designed to coach the rising additive manufacturing (AM) workforce, and targeted on industrial 3D printing enablement, technical coaching and buyer success!”
You’ll be able to RSVP for the open home right here.
August 1: 3D Printed Orthopedic Implants with 3DHEALS
The most recent digital 3DHEALS panel, welcoming a bunch of worldwide consultants, is about “3D Printed Orthopedics Implants,” held at 11 am EST this Thursday the first. Moderated by Craig Rosenblum, the President of Himed, the dialogue will give attention to modern biomaterials, what we are able to be taught from failed 3D printed implants, and the altering regulatory panorama. The panel is sponsored by Himed, and there can be digital networking accessible on Zoom.
“Please register now to be a part of this inspiring dialog that guarantees to reshape how we take into consideration orthopedic care.”
You’ll be able to register for the panel right here.
August 15: 3D Printing/AM Market Developments & Alternatives
This final webinar remains to be a pair weeks away, however we wished to be sure you had loads of time to place it in your calendar! On Thursday, August fifteenth, at 12 pm EST, additive manufacturing market analysis and business evaluation supplier AM Analysis, which has tracked and forecasted the 3DP/AM business markets for greater than a decade, will maintain a free, data-based webinar about “3DP/AM Market Developments & Alternatives.” 2023 was usually a 12 months of slower development for the 3D printing/AM markets, however midway via 2024, is that this 12 months monitoring equally? Be a part of the dialogue with Scott Dunham, EVP of AM Analysis, to seek out out!
“From metals to polymers, PBF to DED to ME (and extra), which space is rising quickest? And which functions and industries? Lastly, simply how does AM Analysis measure the market? What elements of 3DP/AM are included or excluded?”
You’ll be able to register for the webinar right here.
Do you’ve gotten information to share about any future webinars or digital and stay occasions? Please tell us!
Subscribe to Our E-mail E-newsletter
Keep up-to-date on all the most recent information from the 3D printing business and obtain data and gives from third get together distributors.
